Gięty metalowy system sufitowy

The curved metal ceiling system serves architectural visions that go beyond flat surfaces, creating waves, arcs, vaults and organic transitions in a fully project-specific suspended ceiling solution. With 30 years of manufacturing experience at our Istanbul facility, every curve is calculated individually for the project geometry and formed with CNC precision. Curved panels can be used both indoors and on semi-exposed canopies and soffits, giving interior and exterior surfaces a single design language.

Panels are manufactured from DX51D+Z galvanized steel per EN 10346 or AA3005/AA3105 aluminum alloys. Using project-specific tooling on CNC bending and roll forming lines, curvilinear surfaces are built seamlessly with bend radii starting from R300 mm, and segments up to 3000 mm are joined in one continuous flow. Before production, every project passes through 3D modeling and BIM coordination; shop drawings are approved together with the architect and structural engineer so tolerances and joint lines are resolved before the first panel is formed.

A wide surface portfolio is available: polyester powder coating in any RAL color, anodizing, mirror finishes and wood-look laminates. For exterior or semi-exposed sections we apply coatings with at least 70% PVDF content and corrosion class C4 solutions per EN ISO 12944. Combining micro-perforation with acoustic fleece achieves sound absorption of up to αw 0.70 measured per EN ISO 354, while linear lighting, HVAC diffusers and sprinkler drops are integrated into the panels invisibly, preserving the uninterrupted effect of the curve.

On fire safety, galvanized steel and aluminum panels reach class A2-s1,d0 per EN 13501-1, and the carrier system is installed in compliance with the EN 13964 suspended ceiling standard. Four-millimeter galvanized suspension wires and project-specific brackets maintain geometric stability even in large curved modules, with demountable details planned for plenum and service access.

Installation starts with a concealed carrier grid referenced by laser level, followed by on-site approval of the first sample module and then series panel hanging. Every panel can be removed and refitted independently; joints and transitions are adjusted to align with lighting lines. Typical production time is 2-4 weeks depending on project scope, and our site team manages the process from installation through handover.

Typical applications include 5-star hotel lobbies, airport terminals, shopping mall atriums, museums and cultural centers, concert halls, corporate headquarters entrances and luxury retail flagships. Our engineering team handles surveying, structural calculation, detail design and handover as a single-source service.